PS4 Controller Flashing White: 5 Easy Ways to Fix This Issue

Are you experiencing issues with your PS4 controller flashing white lights regularly? Are you eager to get assistance to fix this issue fast? Continue reading until the final.

The PS4 controller has its own array of problems. From being unable to connect to the console to disconnecting at the same time, there have been many changes in the controller’s history. The most frustrating problem is when the PS4 controller is in a non-responsive state and then flashes a white light.

This is a common occurrence, and there are some easy solutions to solve the PS4 controller flashing white lights issue. It typically occurs when the controller batteries are depleted or the controller is unable to communicate with the console for unknown causes. Begin with the first option and then work your way down in the same manner.

What Does PS4 Controller Flashing White Mean?

When a PS4 controller flashes white, it typically indicates:

• The controller is trying to connect to the PS4
• The controller cannot pair with the console
• A Bluetooth connection error has occurred
• Firmware or cable issues are preventing synchronization

Unlike the blue light (successful pairing), a flashing white light means the connection process has failed or is stuck.

Why Is My PS4 Controller Flashing White? Common Reasons

The PS4 controller’s white flashing issue typically occurs due to two factors. One reason is due to a low battery; this means you need to charge your PS4 controller to get it working again. Another reason is that the controller is trying to connect to the PlayStation 4, but fails due to an unknown factor(s). Don’t fret, use the following methods to resolve the PS4 controller flashing white light issue.

Also read: PS5 Controller Drift? Try 7 Easy Fixes Before Replacing It

How to Fix PS4 Controller Flashing White Issue

1. Resetting your Controller

PS4 controllers include a small reset button located on their backs. You will need a small pin to put into the hole and then press the button. This will ensure that no one changes the settings of your controller. There are specific steps you must take to ensure that the controller is reset for connection.

• Take a small pin to click the reset button on your controller for three minutes. Your PS4 will be up, and the blue light is blinking as you press the reset button.
• After resetting your control panel, shut down the PS4 completely. Wait for 2-3 minutes.
• Switch your PlayStation 4 back on and then try connecting your controller to the console. Check if you can connect it correctly.

2. Using Micro USB Cables

In addition to connecting to your PS4 controller wirelessly, you can use the Micro USB cable. This Micro USB cable can be used to establish the connection initially. Once the connection is established, you can switch to Bluetooth. We will try to power cycle the controller, so that if you have any incorrect configurations, the controller will be reset.

• Turn off your PS4 device at the console’s front and then put it into sleep mode.
• When all the lights on the console are gone, unplug the power cable from the outlet.
• Then you need to press the Power button for 30 seconds to ensure all the power is depleted.
• Then connect your controller with the PS4 using a micro USB cable. Start the console and hit any button. The controller may be recognized and function just as expected.

If it does not work with the current USB cable, you can try a new USB cable. Many smartphones today include a micro USB cable for connection. Try connecting them and see if this trick works.

3. Using a Second Controller

Another option that is a good fit for many users is to use another controller. You can use a secondary controller to adjust the settings and then try to connect the original PS4 controller, which flashes white. If you don’t own an additional controller, you can borrow one from a friend without buying a new controller.

• Connect your 2nd controller to the console properly and ensure it is functioning. Go to settings > devices > Bluetooth devices. Make sure only the active controller is displayed in this window.
• If you are on the controller that isn’t working, press the Share button for five seconds. Addintloy, press the PS button simultaneously until you’ve seen the light bar flash twice per second or so.
• Following the steps above, you can see both controllers (green light mean connected)
• Then, using the working controller, select the non-working controller. It will try to connect to the controller (it will display ‘Please wait’).
• The device will ask you to connect a new controller. Select yes, and you’ll be done.

4. Pressing PS4 and Share Button

There’s a different solution could be tried before proceeding to boot your system into Safe Mode. This solution was discovered by users who conducted tests and trials and then shared on the web community. Follow the steps.

• Click and hold the PS and share buttons at the same time.
• Keep pressing both buttons until the PlayStation 4 turns on.
• After the PS4 is powered on, check if all controls are working, and also whether the console is responding to every command from the controller.

5. Using Safe Mode

Safe Mode is available on the majority of consoles and computers to enable users to perform advanced diagnostics and assist in updating firmware or resetting databases. Since you can’t use the PlayStation because the PS4 controller isn’t working, it is possible to enable Safe Mode and try some of the solutions provided below.

Here are the steps to follow to enter safe mode:

• Click the Power Button of the PS4 to turn off the power. This indicator blinks for a couple of times.
• After turning off the PS4, press and hold the Power Button and keep pressing it until you receive 2 beeps. The first one will normally be heard at the time you press it first, and the second sound will be heard after you press it for a long time (for approximately 7 secs).
• Then connect your PS4 console using a USB cable. Press the PlayStation button that is at the top of the controller. You’re now entering Safe Mode.
• Once you’re in safe mode, click the 5 fifth option” Rebuild Database”. This will scan all of your drives and then create a new database of the contents. The process will take a while until it is completed (it can take some time dependent on the volume of information).

If rebuilding the database does not help, then you need to update your system. There may be an update that is available for the software from Sony that fixes any bugs or issues you may have encountered. Select the 3rd option when you boot to safe mode.

Also read: Xbox Controller Blinking or Flashing? 7 Simple Fixes That Work

When the PS4 Controller Flashing White Won’t Stop

If none of the fixes solve the PS4 controller flashing white issue, the issue may be hardware-related.

Possible Hardware Problems

• Damaged Bluetooth antenna
• Weak or dead battery
• Internal circuit damage

In this case, consider:

• Replacing the battery
• Visiting an authorized PlayStation service center
• Buying a new DualShock 4 controller

How to Prevent PS4 Controller Flashing White Issue

• Always use data-supported USB cables
• Avoid pairing the controller with multiple devices
• Keep PS4 software updated
• Don’t overcharge the controller
• Store the controller in a dry, dust-free place

Bottom Line

These are the easiest solutions to fix the PS4 controller flashing white issue. What method is the best for you solve a problem? If the problem persists, you can post a comment below, and we’ll look into what else we can help.

FAQs: PS4 Controller Flashing White